Spring Sprinkler System Turn On Startup Special

With our Spring Turn On service, here is what we will do for you:

1. Turn the water on to the sprinkler system and inspect the plumbing and vacuum breaker.
2. Check and install pump, suction line, check valve and filter, if applicable.
3. Activate the controller, set watering schedule and test all valves in the system.   Install new battery when applicable (battery sold separately).
4. Inspect and adjust system for proper coverage, repair line breaks and broken sprinkles if needed.  Repair charges will be an additional billing.
5. Check cleanliness of all lines, heads and nozzles.  Trim sod from around all heads and flush as necessary.